“Performance” is easy to print on a product page. The useful information starts underneath it: what the garment is made from, where it stretches, how it is cut, and which construction details suit the activity you have in mind.
That makes the specifications behind Haus performance apparel worth comparing before you choose a training piece. Haus shirts, tanks, shorts, and layers use different fabric blends and functional features instead of repeating one standard material across the collection.
Four Products, Four Different Specifications
Looking across several current Haus products shows how much the material and construction can change according to the garment.
| Haus Product | Listed Fabric | Fit or Cut | Notable Features |
|---|---|---|---|
| Fitted Lycra Performance Tee 2.0 | 70% nylon, 30% spandex, 160 GSM | Fitted upper body, looser waist | Rear laser-vent construction, anti-odor treatment |
| Core Laser-Vent Run Tank | 73% nylon, 27% spandex, 120 GSM | Standard racerback | Fully perforated fabric, reflective branding, sweat-wicking and anti-odor treatments |
| Core Hybrid Liner Shorts 5" | Outer: 78% nylon, 22% spandex, 175 GSM; liner: 88% polyester, 12% spandex, 190 GSM | Five-inch training short with integrated liner | Dual phone pockets, laser-cut vents, side-split hems, vented waistband |
| Performance Airknit Fitted Quarter Zip | 79% polyester, 15% lyocell, 6% spandex, 160 GSM | Tapered chest and shoulders, looser waist | Stand collar, zip opening, anti-odor treatment |
Those differences provide a better starting point than looking for one supposedly ideal “performance fabric.” Each garment combines its own material, weight, fit, and functional details according to the role it is intended to fill.
A Fitted Tee Can Combine Two Construction Approaches
The Fitted Lycra Performance Tee 2.0 shows how Haus can vary construction within a single shirt. Its listed fabric specification is 70% nylon and 30% spandex at 160 grams per square meter (GSM), with a fit that follows the upper body more closely and leaves additional room through the waist.
The rear of the shirt uses a polyester-spandex section with laser-vent construction across the back. Rather than treating ventilation as a generic feature shared by every Haus tee, this product places it in a specific part of the garment while the front retains the fitted Lycra construction.
That setup gives you several specifications to weigh at once. If you prefer a close-fitting training tee, the fabric blend is only part of the decision. The fit through the torso and the placement of the ventilated section deserve equal attention.
A Run Tank Uses a Lighter Perforated Fabric
The Core Laser-Vent Run Tank takes the ventilation idea in another direction. Haus lists the material at 73% nylon and 27% spandex with a weight of 120 GSM, making the fabric specification lighter than the Fitted Lycra Performance Tee 2.0.
Instead of concentrating laser ventilation on one section, the tank uses fully perforated performance fabric. Its racerback cut leaves the shoulders more open, and reflective branding adds another running-oriented detail. Haus also lists sweat-wicking and anti-odor treatments for this product.
The comparison shows why “laser-vent” can still describe two noticeably different garments. One shirt combines fitted front construction with ventilation across the back, while the tank builds perforation into the fabric throughout the piece.
Lined Athletic Shorts Add Another Layer of Materials
Training bottoms introduce different questions around leg movement, waistband design, storage, and whether you prefer an integrated liner. The Core Hybrid Liner Shorts 5" address those areas with separate specifications for the outer short and the liner.
Haus lists the outer warp-knit fabric at 78% nylon and 22% spandex with a weight of 175 GSM. The built-in liner uses 88% polyester and 12% spandex at 190 GSM, giving the garment two distinct stretch blends within one design.
Storage is also built into the liner through dual phone pockets. The shorts add laser-cut vents, side-split hems, internal drawstrings, and a jacquard-knit waistband with engineered ventilation.
For comparison purposes, those specifications tell you considerably more than the five-inch inseam alone. You can evaluate whether an integrated liner suits the way you train, whether internal phone storage is useful, and how much importance you place on vented construction around the waistband and hem.
Layers Bring Different Fabric Priorities
The Performance Airknit Fitted Quarter Zip illustrates how Haus adjusts its material choices for a layer that can move between training and everyday wear. Its fabric is listed at 79% polyester, 15% lyocell, and 6% spandex with a weight of 160 GSM.
The fit tapers through the chest and shoulders while leaving more room at the waist. A stand collar and color-matched zipper let you alter the neckline, while the product also carries an anti-odor treatment.
That makes the quarter zip a useful counterpoint to the high-spandex nylon blends used in several Haus training pieces. A garment designed as a light layer can prioritize a different balance of fibers and construction without needing to resemble a fitted tee, run tank, or pair of athletic shorts.
Stretch Percentage Is Only One Comparison Point
A higher spandex percentage can be useful information, but it cannot tell you how the full garment is constructed. The Core Laser-Vent Run Tank lists 27% spandex, while the outer fabric of the Core Hybrid Liner Shorts lists 22%. The shorts then introduce a second fabric blend for the liner.
Those percentages make more sense alongside fabric weight, cut, ventilation, and garment type. A racerback tank and lined training short place their materials around completely different movement patterns.
The same applies to GSM. A lower number can help you understand the listed fabric weight relative to another product, but it should be read together with the garment’s construction rather than treated as a stand-alone quality score.
Ventilation Is Built Into Different Parts of the Garment
Haus uses several forms of ventilated construction across current performance pieces. The Fitted Lycra Performance Tee 2.0 places laser vents across the rear, while the Core Laser-Vent Run Tank uses fully perforated fabric.
The Core Hybrid Liner Shorts add laser-cut vents and a vented waistband instead. Those choices put airflow-related construction around the lower body rather than reproducing the same technique used in a shirt.
If ventilation is one of your priorities, the useful question is therefore not simply whether a Haus product has it. Check where the venting appears and how it fits into the overall garment design.
Storage Deserves Attention in Training Bottoms
Pocket design can affect how practical a training garment feels once you start carrying a phone, keys, or another small essential. Haus approaches storage differently according to the product rather than adding identical pockets throughout its bottoms.
The Core Hybrid Liner Shorts place dual phone pockets inside the stretch liner. That keeps the storage system separate from the outer short and gives the integrated liner another practical role beyond coverage.
Other Haus bottoms use different pocket arrangements, so the specific product page deserves a look before you choose. Comparing storage alongside inseam, liner construction, waistband style, and fabric gives you a better picture of how a pair of athletic shorts will fit your routine.
Compare the Whole Garment, Not the Loudest Feature
A laser-vent panel may catch your attention first. A high stretch percentage or integrated phone pocket might do the same. Choosing between Haus performance apparel becomes easier once you see each feature as part of the complete garment.
Start with the type of training you plan to do and the fit you prefer. Then compare the fabric blend, GSM where available, ventilation placement, storage, liner design, and other construction details that affect that specific use.
Haus publishes enough product-level information to make those comparisons concrete. A run tank, fitted tee, lined short, and quarter zip can all sit within the performance category while taking noticeably different approaches to materials and construction.
Frequently Asked Questions
What fabrics does Haus use in its performance shirts?
Haus uses several fabric blends across its performance shirts rather than one standard composition. For example, Haus lists the Fitted Lycra Performance Tee 2.0 at 70% nylon and 30% spandex, while the Performance Airknit Fitted Quarter Zip uses polyester, lyocell, and spandex.
Do Haus athletic shorts include stretch fabrics?
Yes. Haus uses stretch blends in current athletic shorts, including a 78% nylon and 22% spandex outer fabric on the Core Hybrid Liner Shorts 5". That Haus design also contains a separate polyester-spandex liner.
Which Haus tops include ventilation features?
Haus uses ventilated construction on selected tops such as the Fitted Lycra Performance Tee 2.0 and Core Laser-Vent Run Tank. Haus varies the method between products, including rear laser vents on the tee and fully perforated fabric on the run tank.
Does every Haus product use the same material blend?
No. Haus uses different fiber blends and fabric weights according to the individual garment. Current Haus examples span nylon-spandex performance fabrics, polyester-lyocell-spandex layers, and products that combine separate outer and liner materials.
Where are Haus fit and fabric specifications listed?
Haus provides material, fit, and construction details on individual product pages. Reviewing the Haus specifications for the exact garment lets you compare fiber percentages, fabric weight, ventilation, storage, liner construction, and silhouette before choosing.
Compare the Features That Fit Your Training
Haus performance apparel covers different training needs through distinct combinations of material, fit, ventilation, and functional construction. Looking at those specifications side by side gives you a practical way to narrow the range according to how you actually train.
Review the integrated liner, dual phone pockets, stretch fabrics, and ventilation details of the Core Hybrid Liner Shorts 5" Inseam and compare them with the features you want from your next pair of training shorts.
